REAL PEOPLE - NOT "BUY IT" BUTTONS - 888-826-0939
It is no longer a issue of technology, it is a social and political issue. Ben Luce, of New Mexico Solar Energy Association.
Our Solar Panel pricing is the best in the world If you find a better, in - stock - internet price on first line Modules, Tell us where you found it, and if it's valid, we'll match their price plus 10% of the difference that's a promise!
For many years we have exclusively carried BP Solar Panels. There is a world wide shortage of silicon, the material used in the production of computer chips and solar modules. This has forced us to find other manufacturers of solar modules to offer to you our customer. We have chosen only those manufacturers that produce modules of the quality we can promote and feel good about.
Call Patty at 888-826-0939 and ask about other manufacturer's modules that we have available.
You won't go wrong with these panels. You won't go wrong with us. There are quite a few sites on the internet claiming to have the best prices in the world... If you've checked them out you are probably wondering... which world? Their pricing isn't ever close to ours.
The BP photovoltaic Panels are designed to provide superior value and performance for residential, commercial and industrial use. With time-tested multicrystalline silicon solar cells, it provides cost-effective power for DC loads or, with an inverter, AC loads. With 72 enhanced-efficiency cells in series, it charges Batteries efficiently in virtually any climate. At 160-195 watts of nominal maximum power, BP's are used in utility/grid-supplemental systems for residences, commercial buildings, and centralized power generation in remote systems for applications including telecommunication, pumping and irrigation, cathodic protection, remote villages and homes, and land-based navigation aids. 25 year warranty for power output.
BP Module Warranty
Check out
our Used Modules Page
All of our Solar Panels are brand new first line... we do not sell seconds, returns or repaired modules. We are one of the largest volume distributors on the internet. Our prices may look too good to be true, they're not... they're just great prices.
Our Solar Panel pricing is the best in the world If you find a better, in - stock - internet price on first line Modules, let us know and if it's valid, we'll match that price plus 10% of the difference. That's a promise!
Please call Patty at 888-826-0939 to verify pricing and availability. Be sure to ask if you qualify for FREE FREIGHT on your modules.
We always have many other brands of Solar Modules not listed below! If you don't see what you are looking for please ask Patty or Tom about other manufacturer's modules that we have available.
Pricing and availability last updated June 24, 2008
Click Model Number for Data Sheet
Peak Power Watts
Voltage
Minimum Order Quantity
Dimensions
L" x W" x D"Lowest Prices Anywhere
SHARP 224 224 29.28 1 64.6 x 39.1 x 1.8 $1009.97 XC3 220 220 30.2 call for proper sizing on Grid-Tied systems 65.04 x 39.6 x 1.5 $989.97 In Stock!
SHARP 216 216 28.71 One 64.6 x 39.1 x 1.8 $979.97 Please See Sharp 224
SHARP 208 208 28.5 Two per Box 64.6 x 39.1 x 1.8 $929.97 In stock!
BP SX3200 200 24.5 One 66.1 x 32.9 x 1.97 $877.97 Good stock!
BP SX3195 195 24.4 One 66.1 x 32.9 x 1.97 Running Low use BP 3200
EVERGREEN SPRUCE 190 190 26.7 One 61.8 x 37.5 x 1.6 $839.97 Good Stock!
Sanyo 186 Bifacial (double sided) Modules 186 54.8 One 53.2 x 35.3 x 2.3
$1039.97
In stock!
Mitsubishi UD180MF5 180 24.2 2 65.3 x 32.8 x 1.8
$795.97
In Stock!
EVERGREEN SPRUCE 180 180 25.9 One 61.8 x 37.5 x 1.6
$789.97
In Stock!
BPSX-175B 175 35.4 One 62.8 x 31.1 x 2.0 $779.97 Good Stock!
Yingli-175Wp 175 23.5 Two per Box 51.6 x 38.9 x 1.9 $729.97 In Stock!
Solar World SW175 Monocrystaline
165 35 1
63.9 x 32.1 x 2.2 $815.97 In Stock
BPSX-170B 170
34.4 One 62.8 x 31.1 x 2.0 Running Low USE BP-SX175B Mitsubishi MF 170B3 170 24.2 4 62.2 x 31.5 x 2.0 $746.97 Mitsubishi MF 165B3 165 24.2 One 62.2 x 31.5 x 1.8 Use Mitsubishi 180 Solar World SW165 Monocrystaline
165 35 1
63.9 x 32.1 x 2.2 $755.97 Use Solar World 175
BPSX-160B 160 34.4 One 62.8 x 31.1 x 2.0 $715.97
Small Stock!
Mitsubishi MF155EB3 155 23.4 One 62.2 x 31.5 x 1.8 SOLD OUT
123
17.2
One
59.02 x 26.06 x 1.8
$605.97
In Stock
BPSX-3115 115
17.1
One
59.4 x 26.5 x1.97 $562.97
In Stock!
SolarStar100 100
34 One 40.3 x 29.7 x 1.4
$529.97
80
17.6
One
47.4 x 20.1 x 2.0
$469.97
In Stock
SolarStar-75 75
17.5
10
43.7 x 20.8 x 1.4
$459.97
In Stock
65
17.6
One
43.7 x 18.8 x 2.0
$394.97
In Stock
Uni-Solar US64 64 16.5 One 53.8 x 29.2 x 2.0 $327.97 In Stock
SolarStar-50 50 17 One 29.7 x 20.12 x 1.4 $298.97 In Stock
BP-350U 50 17.3 One 33.0 x 21.2 x 2.0 $319.97 In Stock
BP-340U 40 16.8 One 30.1 x 19.7 x 2.0 $299.97 In Stock
BPSX-30U
30
16.8
One
23.1 x 19.7 x 2.0
$263.97
In Stock
20
17
One
21.1 x 14.3 x .7
$189.97
In Stock
BPSX-20U
20
16.8
One
19.7 x 16.4 x 2.0
$199.97
2-4 Week Lead Time
SolarStar-10 10 17.5 One 16.3 x 9.8 x .7 $109.97 In Stock
BPSX-10M 10 16.8 One 16.4 x 10.6 x 1 $139.97 2-4 Week Lead Time
SolarStar-5 5 17.5 One 10.9 x 7.34 x .7 $69.97 In Stock
BPSX-5M 5 16.5 One 9.7 x 10.6 x 1 $99.97 In Stock!
Module Pricing Does Not Include Shipping.
Please call Patty at 888-826-0939 to verify pricing and availability. Be sure to ask her if you qualify for FREE FREIGHT on your modules.
MC Connector Cable and Accessories for Solar Modules
We custom make UL Listed MC cable in any length . We make these in "loops" with a Positive MC connector on one end and a Negative MC connector on the other. To figure your cost for the UL Listed assembly, simply multiply the number of feet required and add a pair of installed MC Connectors.
These cables are NOT intended to be used as supplied, rather they must be cut either to length, or in the middle of the loop, for insertion into a combiner box or other appropriate connection.
Don't forget to order our impossible to find Stainless Steel cable clips to keep your module interconnect cables neatly connected to frames so they do not drop below the array. Stainless Steel Module wire clips will last forever, without corrosion. We don't recommend using plastic tie-wraps as they fall apart in sunlight in a very short time.
They are designed to hold one OR two USE-2 cables securely, with a specially designed tab to allow the use of a flathead screwdriver to aid in installation and removal of the clip.
Here's an idea who's time has come! It's the conduit transition entry box... Provides a simple array (MC Connector wire) to ridged or flexible conduit wiring transition.
Simply enter your MC Connector cable (USE-2) into the box, make your connections to your THWN-2 wiring using your choice of wiring methods (see picture) either DIN rail-mounted connectors (internal DIN Rail provided), Wire Nut Connectors or Weatherproof Butt Splices, and you're done.
UV resistant two piece shell with a special seal for water-tight enclosure. Appropriate for Roof Mount, Top-of-pole Mounts and Ground Mount installations.
As of May 15th 2008 we're still waiting for UL approval of this box, so we cannot offer it for sale as yet... but it's coming!
Includes aluminum attaching bracket to mount box to the rack rail.
Available in two sizes:
 |
3/4 inch conduit for 4 PV Strings and 1 equipment ground. 7.08L X 5.03W X 3.34H |
|
1 inch conduit for 6 PV Strings and 1 equipment ground. 7.08L X 7.56W X 3.34H |
| Part Number | Description | Price |
| SIS-55012 | MC Cable 12 Gauge per foot for custom cable lengths | $.99 per foot |
| SIS-55010 | MC Cable 10 Gauge per foot for custom cable lengths | $1.09 per foot |
| SIS-55002 | MC Connector 10 or 12 Gauge Per Pair Installed | $17.97 |
| WIE-26634 | 3/4" Conduit Entry Box | $TBD |
| WIE-26634 | 1" Conduit Entry Box | $TBD |
| WIE-60050 | Stainless Steel Module Cable Clips | $0.97 each |
PV Low Temperature Over-Voltage Bypass Circuit Box
Protect equipment from high PV Open Circuit Voltage at Low Temperatures
Size the PV array for maximum energy harvest
Every PV array can now be sized without being limited by the high
open-circuit voltages present at low temperatures. The Apollo Solar LTOB
automatically switches modules out of the circuit if the temperature
falls below the specified point.
Simple, Reliable Operation
The LTOB removes 1 module from the 6 module string keeping Voc under
140v. When the temperature falls below 10OC (50OF) the LTOB turns on and
the top module is switched out of the circuit so the Voc drops to 120
volts. The 5 module string is below the 140volt limit down to -40O. When
the temperature rises, the LTOB turns off and the module is switched
back into the circuit.
Fast, Easy Installation
The Apollo Solar LTOB units are supplied with an adhesive tape on the
back side. Just peel off the backing layer and stick the LTOB and
Temperature Sensor to the back of the PV module to be cut from the
string. Simply snap the MC connectors together. At normal or high
temperatures the LTOB connects straight through and the PV array
functions normally.
Features and Benefits
· Automatically bypasses PV module at low temperatures to drop Voc.
| Expand the input voltage range of any Inverter or Charge Controller. |
| Enables an extra PV module in every string. |
| Use with any modules up to 85Voc. |
| Any string voltage up to 600VDC. |
| Switch up to 8 Amps per string. |
| Choice of temperature switch point. |
· Complete safety at the lowest of temperatures without compromising the high temperature performance.
| Size arrays for maximum power and forget the cold/Voc problem. |
| MC connectors - quick wiring. |
| Failsafe to low voltage output |
| Sticks to back of any module. |
| Very low power consumption. |
| Part Number | Description | PRICE |
| ASI-66001 | PV Low Temperature Over Voltage Bypass Circuit Box | $159.97 |
Cold Fusing Shrink Tape
Black industrial grade cold fusing shrink tape, so heat is not required to shrink. Excellent for waterproofing the MC Connectors on your solar modules. Seals out moisture and insulates up to 450 volts. Tape is 3/4 inch wide in a 30 foot roll.
More convenient than tubes. Can be used in any application where you may have used heat shrink tubing except for underwater well pump connections. available in single rolls or discounted in lots of 5.
| Part Number | Description | Price |
| VEE-70560 | Black Cold Fusing Shrink Tape, Single roll | $9.97 |
| VEE-75560 | Black Cold Fusing Shrink Tape, 5 Lot Each | $7.97 each |
WEEB Grounding System Introduction
Introducing the latest technology in grounding your solar array! Soon to be an absolute must for all PV systems! No more running ground wire to and from every module, and the sweetest thing is that the WEEB system is more effective!
WEEB stands for "Washer, Electrical Equipment Bonding". The WEEB family of products are used to bond solar modules to solar mounts. The mounts are then grounded so the entire assembly is grounded. The products use patent pending technology for bonding anodized aluminum surfaces together. Bonding PV modules to a mounting structure removes the need to wire the modules separately. Only the mounting structure needs to be wired to ground.
|
Gives more consistent results than the method of scraping off the anodized coating by hand and using star washers. |
|
It saves you time! ...No more running ground wire to every PV module. |
|
It's safe. ...Meets UL467 requirements for bonding/grounding systems. |
|
Its reliable. ...Patented design features stainless steel teeth that bite into anodized aluminum, providing a gas tight connection which prevents oxidation.
|
Introduction to the parts needed
The
WEEB-9.5 is a washer used to bond the frame of a PV
module to a pole or ground mounting
structure. The WEEB-9.5 has
fingers which will hold the part in any 3/8 inch hole.
This allows the WEEB-9.5 to
be inserted at the mounting locations and stays in place
while the module is aligned. When the hardware is
tightened, specially designed teeth on the WEEB-9.5
embed into the module and mounting structure, making a
gas-tight connection.
n
A
variant part, the WEEB-9.5NL, does not have the fingers.
This allows the part to be used to join structural
pieces of a mounting structure where only a single
fastener is used and allows bolts up to 3/8 inch in
diameter. The fingers are not needed because it is
relatively easy to assemble a single fastener with the
WEEB, while for the case with modules, the large size of
the module would make it difficult to position both the
module and the WEEB. See the installation instructions
for detailed pictures.
The WEEB-xMC(s) are used for rail-mounted modules. Retaining features keep the parts on the rail while still allowing them to be correctly positioned beneath the modules.
Rounding out the product family is the WEEB Lug, a two piece set of washer plus lug. The washer has specialized teeth for making connection through an anodized aluminum surface. The lug allows the lay-in connection of wire after the lug has been mounted.
Please call us at 888-826-0939 for more information or pricing on the WEEB Grounding System
Delta DC Lightning Arrestor
Don't
forget lightning! If you have all those expensive modules on your roof or
top of pole, that's alot of metal to attract lightning into your house. Most
combiner boxes are made so that the PV - and + are isolated from ground.
This enables you to install a Delta lightning arrestor at the combiner and
bond the module frames, Delta and the combiner box to the ground stake at
the bottom of you rack.
Lightning does what it wants but, if you make a good suggestion it may follow it, and keep it from entering your house. Call Tom at 888-826-0939 to discuss wiring this up.
We also carry AC and Hi Voltage Delta products Call with your needs
|
Model Number |
Description |
Price |
|---|---|---|
|
DEL-20006 |
LADC Lightning Arrestor |
$ 37.97 |
The Most Complete Renewable Energy
Product Inventory
There are almost 500 Pages on this Web site. It is one of the world's largest Renewable Energy web sites. Take some time and check out the amazing and essential products we offer.
Our solar panels are the lowest price on the planet!
OH DARN! We make every effort to be exact with out specifications, copy and photography. Errors do occur sometimes, and we apologize for them. We reserve the right to make changes and correct errors to prices and specifications whenever and wherever necessary. We also reserve the right to limit quantities and change pricing. We do appreciate your understanding.
