Schneider Electric (formerly Xantrex) XW System Control Panel
PLEASE NOTE: For the NEWER Conext XW+ or SW inverter systems please click on this link: Schneider Electric System Control Panel 865-1050-01 to be directed to the new System Control Panels used with For XW+ 5548 NA, and XW+ 6848 NA inverters along with all SW inverter models. - It has the updated firmware you will need.
Schneider Electric’s XW System Control Panel interfaces directly with and is required for all XW Inverter/Charger(s). The XW System Control Panel (XW SCP) is a XANbus™-enabled device featuring a graphical, backlit LCD display screen with resolution 128 x 64 pixels, that displays system configuration and diagnostic information for all devices connected to the network. You can maneuver your way around the devices multiple screens and menus with the use of the 4 tactile keypad buttons on the front of the unit. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System. It Interfaces with: XW4024, XW4548, & the XW6048 Inverter/Charger(s), all XW Solar Charge Controllers, and the XW Automatic Generator Start.
Other functions available are an internal clock that keeps time for the entire system, an audible alarm when/if a fault condition in the system arises, Low power consumption, Local signaling, 1 LED red fault 1 LED green online, Data backed up, Non-volatile memory, Communication port protocol via XANbus.
Provided equipment includes flush surface mounting hardware.
Height 6” x Width 4.07” x Depth 1.58” & Weighs approximately ½ Lb. Optimal ambient air temperature for operation ranges -20...50 °C. Ambient air temperature for storage -40...85 °C.
Standards CSA 107.1-01 UL 458 Product certifications CSA FCC Class B Industry Canada Marking CECall our toll free number 888-826-0939 if you have any questions or product inquiries.