Product Detail
BFS 48 Volt Kit for 845 to 1690Ah HuP Solar One Batteries
The TB4 Valve kits fit all HuP battery sets from 845 thru
1690 Amp Hour sizes. Safety and labor savings are of the utmost importance in
your battery filling station. These valves are manufactured with the highest
quality materials that keep all working parts above the battery cell.
A basic kit has all of the components needed to assemble
the watering system on a battery. Tubing is not pre-cut or attached to the
barbs on the valves. Each kit includes an instruction sheet with basic assembly
recommendations, or the installer can utilize the desired drawing layout.
Features:
Drying Chamber. Exiting
gasses are forced through a drying chamber. This action allows the escaping
gases to leave behind a major portion of electrolyte that may be attached to
the escaping gases. The result is less frequent watering intervals.
Lever Operated Shutoff Valve. When
the electrolyte level rises, the lever pulls the shutoff valve in the closed
direction and will not allow the cell to overfill.
Water Trap. The water trap keeps a
small amount of water in the valve that will not allow dangerous hydrogen gas
to move from cell to cell.
Double Chamber. The
patented double chamber designed in each valve keeps dangerous hydrogen gas and
water movements separate.
Electrolyte Level Indicators. The
valve provides an electrolyte level indicator to determine that each cell has
been properly watered.
Gravity Measuring Port. A
hydrometer port in the valve allows specific gravity checks without removing
the valve.
Improved Barb Design. Hoses
are almost impossible to remove unintentionally. A better barb angle has been
incorporated to allow ease of installation.
Call
Toll Free 888-826-0939 with Questions