Inverters Grid-Tied and Battery Based
Inverters are truly the heart of all renewable systems, be they grid-tied or off-grid. Basically and inverter takes DC electricity from a DC source such as solar panels or a battery bank and inverts it to AC which we call house current. We have inverters that output USA 120/240 volt 60Hz or European 230 volt 50 Hz electricity this must be specified at the time of order as there is no inverter that does both.
The most common grid-tied inverter takes hi voltage DC and outputs to the electrical grid during the day, thus “storing” your energy production there enabling you to “take it back” at night. Of course any electricity that you use during the day comes directly from your own production. In this way you can eliminate your electric bill entirely, or at the very least drastically reduce the bill. 85% of all the grid tied systems we design are exactly this system. The only drawback to this design is that when the grid goes down the system must shut down as well. You can’t be an “island” in the middle of the grid producing power because; you could kill someone working on a power line somewhere else.
About 15% of the grid-tied systems we design are battery based, while they are designed to normally “sell” to the grid reducing or eliminating the monthly electric bill they are further designed to allow the house to run independent of the grid in a power outage. These systems employ a bank of batteries as a temporary storage device to carry you thru a power outage. Typically battery banks are designed to provide 8 to 12 hours of power without the need of a generator supplementation. For areas that may experience prolonged outages frequently, a backup generator can be integrated with the system to infrequently supplement the batteries as needed.
The last type of inverter system is the “off grid” or independent system. This type of system when properly designed is completely autonomous from the power grid, thus allowing you amazing flexibility as to choice of location on the planet. With the notable exception of Alaska, Northern Canada and the Antarctic during the 6 or so weeks in their winter, an off grid system can be properly designed to provide clean abundant power anywhere on earth. You are basically your own power company. Really the only thing you’ll miss out on is the frequent power outages that grid customers experience because, the sun comes up every day and your power never goes out.
An inverter system includes one inverter or more plus, an electrical distribution (breaker) panel, a system controller (brain), some type of system/battery monitor and other optional devices like an automatic generator start module. Don’t try to design this yourself. We are experts in the design of these systems and we can tell you all your choices for the equipment you’ll need.
Call Toll Free 888-826-0939 if you have any questions about Inverters
See All Products By:
Manufactured in: Various
Xantrex products are smaller, smarter, and more efficient than traditional power conversion equipment. We provide products today that meet the needs of a wide range of customers, either as a key component that is integrated into equipment produced by others, or combined with a power source to provide a self-contained power solution.
Marine & RV
See All Products By:
Manufactured in: United States
OutBack Power. The Arlington, Washington based company, founded in 2001 as a maker of “pure sine wave” off grid inverter products, has expanded to grid-tie and hybrid inverters, maximum power point tracking charge controllers, communications and network products and integration hardware to keep it all working smoothly together. OutBack Power – Masters of the Off Grid.
Marine & RV