MidNite MNPV16HV-DISCO 4X Combiner Box
Item Number MNS-43200
manufacturer MidNite Solar
Made In United States
Model Number MNPV16HV-DISCO 4X
Product Documents

Product Detail

MidNite MNPV16HV-DISCO 4X Combiner Box

This box is made to combine strings of solar panels and also serve as a load break disconnect. Even remotely disconnect this box when used in conjunction with the Midnite Solar Birdhouse System Controller. You can use up to 16 circuits in and only 1 single Positive/Negative home run out of this box, or break the output in half to serve 2 totally separate MPPT inverter inputs or 2 separate charge controllers. As this box is NEMA-4R rated - it can be mounted in any location or outdoor environment and in almost any position - so mount this combiner within 10 feet of your solar array and you have met the NEC 690.12 Code Requirement for rapid solar array emergency shutdown!

The MNPV16HV DISCO 4X's red handled is LOCKABLE IN THE OFF POSITION!

  • Convertible configuration (field configurable)
  • Sixteen strings combined for up to 230 Amps single pole disconnect)
  • 8 + 8 strings, separate PV+ and PV- for use with 2 inverters (2 pole 115A disconnect)
  • 8 strings plus, 8 strings minus for use with non-isolated inverters (2 pole 115A 600VDC disconnect)
  • Disconnect switch has built in shunt trip with positive feedback
  • See thru dead-front & color coded busbar guards included
  • Birdhouse compatible
  • Optional PV connected power supply
  • Load Break Rated
  • Optional AC connected power supply for redundancy
  • Type 4X aluminum enclosure (no rust, won"t turn to dust) conduit/strain relief holes punched
  • 90 Degree C connections
  • Fuse-holders (MNTS) installed
  • 15a/600v fuses installed
  • Meets 2014 NEC 690.12
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • Made in the USA

Hardware Includes:

  • One MNSPD-600 (Surge Protection Device)
  • Sixteen 1/2" strain reliefs (MNSR-1000)
  • Twenty-five 1/2" NUT MNT 14
  • Nine HOLE PLUG 1/2" NPT (MNHOLE PLUG 1/2)
  • Nine GASKET 1/2"
  • Two 10-32 X 7/8" SCREWS
  • Two 10-32 X 3/6" SCREWS
  • Two 3/8 16 X 7/8" BOLTS
  • Twelve 10-32 KEPS NUT
  • One TERMINAL PIN 18-22 AWG.
  • One TERMINAL PIN 10-12 AWG.
  • One WHITE INSULATOR
  • One BLUE WRENCH (MNWRENCH)

The difference between the regular Disco combiners and the DLTL version is that the MNPV16HV-Disco-4X is made for a single 16 string inverter, 2 8 sting inverters or one 8 string transformer-less whereas the DLTL is set up for 8 strings in and 2 strings out for Dual MPPT inverters or 2 separate solar charge controllers.

If you have questions about our product offerings or need technical support The Solar Biz is here to help! Give us a call 888-826-0939

Search engine powered by ElasticSuite