RoofTech-RT-GEN2 RT MID CLAMP
Mid Clamp to mount to the Roof-Tech RT-E Mount base or RT-E AIR Mount base. Suitable for use with all solar panels with frames between 40+ - 50mm thick.
1 ) Mid Clamp
1 ) Stainless Bonding washer (for electrical grounding)
1 ) Carriage style bolt
2 ) Nuts
2 ) Conical Washers
Talk about thinking outside the box! Introducing Roof-Tech's new innovative solar panel roof mount solution - with no rails, no extra roof flashing needed because of the built in butyl mastic backing, and integrated solar array grounding and wire management. No need to lug around long and inconvenient mounting rails up on the roof that is 30 plus feet in the air, and no high shipping costs.
You will enjoy all the benefits of mounting a complete solar electric system on your roof with engineered stamped approval that will pass any building codes for any area. That means that these babies are rated for very high winds, and high snow loads while actually cutting down on the abuse your roof would have to sustain by using a more conventional solar-roof mount system. It just makes sense.
The All-in-one, rail-less design; RT-E Mount by Roof-Tech Inc
One with the roof: the most compact, versatile mounting system under the sun. Roof-Tech RT-E Mount designed for a low-profile flush to the roof solar installation. There has never been a mounting bracket as compact and elegant as the RT-[E] Mount.
Instead of placing solar panels on top of long rails, you simply fasten RT-[E] Mount brackets to rafters or directly to roof decking. Once panels are secured to the brackets, the system array is electrically bonded. All parts are shipped in a single, compact box, complete with butyl rubber flashing, renowned for its watertight performance and durability. The result is a visually seamless PV installation that stands the test of time.
A single solar panel needs 4 RT-E Mount bases. However a single base can be placed under 2 solar panels (one for each end of the module). So much like any other top-clamp mounted roof installation a full system will include End Clamps, Mid Clamps, and a Roof-Tech RT-E Mount BASE for every clamp no matter the type. While each base can be bolted to the structural beams or trusses of a roof, bolting in most cases is not necessary. With plywood roof decking ½ or thicker you can simply screw this base down right through a standard asphalt roofing material and you are done! It is a fully sealed installation because of the butyl-mastic backing. So quick and easy!
This heavy-duty revolutionary mounting system affords you a cheap solar panel mounting system that is easy to install, stronger, and more inclusive than any other mounting system on the market today.
The RT-[E] Mount
-Allows for a uniquely scalable solar electric system. Gone are the days that your solar mounting equipment doesn't quite fit the new solar panels you are adding to an existing array!
Accessories to the RT-[E] Mount can be included with 1 standard UPS shipping charge such as; Mid clamps and End Clamps appropriate for the solar panel frame thickness you are using & wire harness mounting bracket that will easily manage all of the wiring required on the roof below the solar array (1 for each base is recommended.)
Need help choosing the right base or accessories needed for mounting up any solar panel installation? Please call us Toll Free 888-826-0939