Electric XW-MPPT 80-600 Solar Charge Controller
The Schneider Electric XW-MPPT 80-600 Solar Charge Controller masters
maximum power point tracking (MPPT) to deliver more available power from a
solar module/photovoltaic (PV) array to a battery bank. This solar charge
controller can deliver up to 80 amps of charge to your batteries at up to
Another HUGE bonus, is that you can wire your PV array into longer
series connected strings from 195Vdc to 600Vdc to transmit your solar power and
have less wiring voltage loss. Two or three-stage battery charging processes
can be utilized with manual equalization which maximizes system performance and
extends battery life. This solar charge controller has configurable auxiliary
power output which increases system flexibility. Battery Temperature Sensor
(BTS) to provide automatically temperature-compensated battery charging
These units communicate with other SCHbus/XANbus-enabled devices. We are
available to help you with proper solar module (PV) string sizing for your
application & location. Please contact our engineers at 888-826-0939 if you
would like our assistance.
The Schneider XW-MPPT80-600 Solar charge controller is made to handle,
and charge appropriately, 24Vdc or 48Vdc Battery banks. This charge controller
is designed to take very high voltage from an array of solar PV modules and
step that voltage down to charge a battery bank correctly. The XW-MPPT80-600
has a vented enclosure for maximum heat dissipation. Made of a durable sheet
metal chassis, the device mounts on the wall vertical. For cable entry, the
charge controller has both 7/8" and 1" knock-outs. Accepts 14 AWG 6
The charge controller can be installed with a Conext XW+
inverter/charger or as a standalone battery charger. To configure the charge
controller, either a Conext System
Control Panel (SCP) SCH-12020 or a Conext ComBox SCH-440244 is also required (see “Accessories”
on page A–6 for product part numbers). While both the SCP and ComBox provide
status information and configuration capabilities, the ComBox provides
additional access to configuration settings through a web interface.
Ambient air temperature for
operation -20...45 °C. Ambient air temperature for storage -40...85 °C.
Operating altitude 4572 m Standards. CSA 107.1 UL 1741. Product certifications
FCC Class B. Marking CE.
Call our toll-free number 888-826-0939 if you have any
questions about the XW MPPT 80-600 Solar Charge Controller! Our experts are
available to help you with proper solar module string sizing for your
application & location.